ED Decision 2011/013/R

Each balloon must be equipped with:

1. General:
   1. A standby source of ignition for the pilot light or burner.
   2. An envelope temperature indicator, which may either be of the continuous reading type or a type that gives a warning signal. (See also CS 31HB.49(e))
   3. Where flight manual limitations specify a rate of climb or descent; a rate of climb/descent indicator (variometer).
   4. A fire extinguisher. (See AMC 31HB.72(a)(4))
2. A 'kit' of tethering components, if the balloon is specifically approved for tethered operations. (See CS 31HB.28)
3. For mixed balloons minimum ballast, if applicable.

[Amdt No.: 31HB/1]

ED Decision 2011/013/R

Fire extinguishers should:

(i) conform to EN3 or an equivalent specification acceptable to the Agency;

(ii) have a minimum capacity of 2 kg when using dry powder, or when the extinguishing means is other than dry powder be at least of comparable effect and capacity.

[Amdt No.: 31HB/1]

→ CS 31HB.81